Air-suspension AS-2139 Bedienungsanleitung PDF herunterladen

CAUTION: SHUT OFF POWER TO THE AIR SUSPENSION

PRIOR TO LIFTING OR JACKING THE VEHICLE. MAKE SURE

THE AIR SPRING IS DEFLATED BEFORE ANY DISASSEMBLY.

[1]

REMOVAL

1. Safely raise and support the vehicle.

2 Remove the wheel and tire assembly.

3. Discharge the remaining air from the strut by carefully removing the

solenoid clip. Then carefully turn solenoid to release the air pressure.

4. Loosen and remove the tie rod to knuckle ball joint.

5. Loosen and remove the strut to body nuts at the top.

6. Remove the shock mount to lower control arm bolt and nut.

7. With all fasteners loosened, pull the strut loose from its mounting

position.

Reinstall into vehicle in the reverse order of removal.

TORQUE SPECIFICATIONS

STRUT MOUNT TO SHAFT NUT

STRUT MOUNT TO BODY NUTS

STEERING KNUCKLE BOLTS - COIL SPRING SUSPENSION

STEERING KNUCKLE BOLTS - AIR SUSPENSION

Ft-lbs

30 22

40 30

437 322

400 295

WARNING: The ai r suspension system is under pressure (up to 10 bar, or

150 lbf/in ). Do not allow dirt or grease to enter the system. Always wear

standard protective hand, ear, and eye protection when servicing the air

suspension system.

WARNING: Make sure to tighten all wheel hub bolt nuts to 115-142 Nm

(85-105 lb-ft). Failure to heed to this warning could result in serious bodily

and vehicular damage.

2003-2006 FORD EXPEDITION/ LINCOLN NAVIGATOR

FRONT SHOCK ASSAMBLY

REVISION 07/05/09

AS-2139

CAUTION: SHUT OFF POWER TO THE AIR SUSPENSION PRIOR TO LIFTING OR JACKING THE VEHICLE. MAKE SURE THE AIR SPRING IS DEFLATED BEFORE ANY DISASSEMBL

Keine Kommentare

Air-suspension AS-2139 Bedienungsanleitung